d&b audiotechnik Z5330.050, Manual

4.1. INPUT
The INPUT section represents the input connectors of the first

amplifier while the other two amplifiers are linked within the rack.

The INPUT section allows both analog and digital audio signals to

be fed to the amplifier.

4.2. INPUT LINK
The INPUT LINK section represents the link output connectors of the

last (third) amplifier and allows the linking of further system racks

using the enclosed rack link cable (Z5333 Rack link).

4.3. REMOTE
The REMOTE section allows the daisy chaining of system racks

within a remote network using the enclosed rack link cable (Z5333

Rack link).

Ethernet network
ETH 1

Represents the upper etherCON connector of the first

amplifier and may be used as input while the other two

amplifiers are linked within the rack.

ETH 2

Represents the bottom etherCON connector of the last

(third) amplifier and may be used as output.

Note: In a daisy chain topology, if one device or an entire

rack fails or is switched off, this also affects all subsequent

devices and/or system racks which are then no longer

connected to the network either.
A detailed description of remote control via Ethernet is given in

the technical information TI 310 (d&b code D5310.EN) which

can be downloaded from the d&b website at

www.dbaudio.com

.

4. Z5338 I/O Panel

d&b Z5330.050 Manual 1.1 en

10