1.3 Intended use
The d&b Z5383 VP Mounting bracket must only be used in
conjunction with d&b V-Point or Vi-Point cabinets.
The tie bar of the outer bracket is supplied with two M8 threaded
inserts at the standard d&b spacing (115 mm [4.5"]) for attaching
the following accessories:
▪ Using the Z5010 TV spigot with fixing plate in conjunction with
the Z5012 Pipe clamp, V-Point/Vi-Point cabinets can be
vertically flown from overhead bars or trusses with a tube
diameter between 40 mm and 70 mm (1.5" and 2.75").
▪ Using the Z5024 Loudspeaker stand adapter, V-Point/Vi-Point
cabinets can be mounted onto a loudspeaker stand with a tube
diameter of 35 mm (1.4").
1.4 Assembly
The fixing plate of the inner bracket
[I] is bolted into the M10
threaded inserts at the top or bottom of the cabinet using the two
fixing bolts
[F].
1.5 Adjustments
The vertical aiming and the horizontal aiming can be set
continuously.
Vertical aiming
NOTICE!
Potential risk of damage to material.
The maximum
vertical aiming must not exceed ±30°
1. Slightly slacken the fixing screws
[F].
2. Set the loudspeaker to the required vertical angle.
3. Retighten the fixing Screws
[F].
Horizontal aiming
The horizontal aiming is set at the loudspeaker stand adapter or
the TV spigot assembly.
d&b Z5383 Mounting instructions 1.4 en
5
