1.1 Scope of supply and weight
Please verify the shipment for completeness and proper condition
of the items.
Qty.
d&b Code
Description
1
Z5383
VP Mounting bracket consisting of:
▪ Outer bracket
[A]
▪ Inner bracket
[I]
Including:
2
Fixing bolts
[F]
1
D2821.EN .01
Z5383 Mounting instructions
Weight
6.5 kg (15 lb)
1.2 Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Load safety information
The Z5383 VP Mounting bracket is designed to support one V7P/
V10P or Vi7P/Vi10P loudspeaker.
No additional loads must be added.
The bracket must only be used in an upright position or suspended
vertically as shown in the graphic opposite.
The
maximun vertical aiming must not exceed ±30°
1 Z5383 VP Mounting bracket
d&b Z5383 Mounting instructions 1.4 en
4
