3.1 Z5551 Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty.
d&b Code
Description
1
Z5551
VP Flying adapter link
[1]
Including:
4
Locking pins
[2], linked in pairs with
steel wires.
3.2 Z5551 Intended use
The Z5551 VP Flying adapter link allows two V-Point/Vi-Point or
24S/24S-D cabinets to be flown one below the other and enables
the setting of specified vertical splay angles between the two
cabinets.
For this purpose, the link is equipped with four Locking pins to
allow easy interconnection of the cabinets.
Splay angle settings
Starting from hole eight (8) towards the back, the Flying adapter
together with the link allows the setting of vertical splay angles
ranging from 5° to 30° in increments of 5°.
Hole
8/9
9/10 10/11 11/12 12/13 13/14
Splay
5°
10°
15°
20°
25°
30°
3.3 Z5551 Assembly
Preparing the cabinets
For this application, two additional Flying adapters are required.
The attachment of the Flying adapters is carried out in the same
on page 6.
1. Attach one flying adapter each to the top and bottom panels
of the first (upper) cabinet.
2. Attach one flying adapter to the top panel of the second
cabinet.
3 Z5551 VP Flying adapter link
d&b Z5384/Z5551 Mounting instructions 1.4 en
7
