d&b audiotechnik Z5394, Rigging Manual

Assembly

Inspections before setup
Before setting up the array, carry out a visual inspection of all

system components for faults. This also includes the loudspeakers

and in particular the rigging parts of the cabinets (Front and

Splay/Rear links).

Damaged components must be withdrawn from use immediately.

Please follow the instructions given in 

Þ

 Chapter 3 "Care and

maintenance" on page 9.

2.3  Order of assembly
Due to the compact size of the Y-Series TOP cabinets and the

maximum number of six cabinets that can be flown, the assembly

may be carried out either suspended or on the ground. The

following description refers to the suspended assembly.

1. Prepare the first cabinet
1. At the front release the Locking pins of the Front links.

Þ

 The Front links will slide out automatically.

2. On the rear release both Locking pins and fold out the Splay

link.

2. Attach the Flying adapter
1. Attach the Flying adapter on top of the cabinet until the Front

links of the cabinet fit into the slots at the front of the adapter.

2. Insert and lock the Locking pins of the cabinet's Front links on

both sides.

d&b Z5394 Rigging manual 1.2 en

6