background image

 

Option 2
The bracket is attached to the cabinet with hole 

[c] facing to the

back of the cabinet. One bolt is fitted into hole 

[c] and the second

one is fitted into the axis of slot 

[d] and slot [e] to allow the bolt to

move in slot 

[e].

The vertical coverage angle can be set over a range of 60°,

starting from –30° to –90°.

Option 3
The bracket is attached to the cabinet with hole 

[c] facing to the

back of the cabinet. Both bolts are fitted into slot 

[d].

The vertical coverage angle can be set over a range of 15°,

starting from 0° to +15°.

1.5  Assembly

Attaching the bracket to walls or ceilings

NOTICE!

Only use mounting parts (fixing anchors and screws) that are

suitable for the intended application.
Observe the occurring extraction forces acting on the fixing

anchors and screws. The rated extraction forces for the respective

application (wall or ceiling mounting) and cabinet are listed in the

following table.

Application

Rated extraction forces

Wall mounting

300 N

Ceiling mounting

200 N

To attach the bracket to walls or ceilings, use the holes shown in

the graphic opposite to provide adequate support.
A corresponding fixing template is supplied with these mounting

instructions. Refer to 

Þ

 Chapter 2 "Fixing template" on page 8.

 

d&b Z5398 Mounting instructions 1.3 en

6

Summary of Contents for Z5398













Reviews: