Attaching the connecting plate to the cabinet
1. At rear of the cabinet, insert the T-slot nuts into the T-slot profile
of the cabinet.
2. Turn the first screw through 90° to fix the T-slot nut in place.
3. Tighten the screw to a torque of 8 N
×
m.
4. To fix the remaining nuts, proceed in the same manner.
Attaching the cabinet to the wall plate [1a]
Provided you have mounted the wall plate in the desired position
on the wall, proceed as follows:
1. Attach the cabinet to the wall plate, as shown in the graphic
opposite.
2. Insert the Allen hex screw
[A] and attach the U washers [U]
and the self-securing nut
[N].
3. Slightly tighten the nut.
4. Set your desired horizontal aiming.
5. Finally tighten the nut to fix the cabinet in its horizontal
position.
d&b Z5442 Mounting instructions 1.1 en
7
