d&b audiotechnik Z5442, Mounting Instructions

1.1. Scope of supply
Please verify the shipment for completeness and proper condition

of the items.

Qty.

d&b Code

Description

1

Z5442

Wall mount column 

[1] consisting

of:
–

Wall plate 

[1a]

–

Hinged bracket 

[1b]

–

Cabinet connecting plate 

[1c]

Note: Due to the size and easy

handling of the wall plate 

[1a], it

also serves as the fixing template.

Including:

4

Allen hex screw M6 x 12 

[2]

4

T-slot nut 8 mm / M6 

[3]

1

D2621.EN .01

Z5442 Mounting instructions

1.2. Safety precautions

General safety
Installation and setup should only be carried out by qualified and

authorized personnel observing the valid national Rules for the

Prevention of Accidents (RPA).

It is the responsibility of the person installing the assembly to ensure

that the suspension/fixing points are suitable for the intended use.

Always carry out a visual and functional inspection of the items

before use. In case there is any doubt as to the proper functioning

and safety of the items, these must be withdrawn from use

immediately.

Load safety information

NOTICE!

Only use mounting parts (fixing anchors and screws) that are

suitable for the intended application.
Observe the occurring extraction forces acting on the fixing

anchors and screws. The rated extraction force is 

350 N.

The maximum permitted working load of the Z5442 Wall mount

column is 16 kg (35 lb), which corresponds to the weight of a

complete 24C/24C-E assembly.

1. Z5442 Wall mount column

d&b Z5442 Mounting instructions 1.1 en

4