d&b audiotechnik Z5460, Mounting Instructions

1.1  Scope of supply
Please verify the shipment for completeness and proper condition

of the items.

Pos.

Qty. d&b Code

Description

[1]

1

Z5460

d&b AL Stand adapter

Including:
[2]

4

Philips screw M6 x 16

[3]

4

Plastic washer 

Æ

12

[4]

1

Fixing screw M8 x 16

1

D2749.EN.01 Z5460 Mounting instructions

1.2  Safety precautions

General safety
Installation and setup should only be carried out by qualified and

authorized personnel observing the valid national Rules for the

Prevention of Accidents (RPA).
Always carry out a visual and functional inspection of the items

before use. In case there is any doubt as to the proper functioning

and safety of the items, these must be withdrawn from use

immediately.

Load safety information

NOTICE!

The Z5460 AL Stand adapter is designed to carry the weight of

one (1) AL60/ AL90 or ALi60/ALi90 cabinet mounted on the

Z5458 AL Base plate.

1.3  Intended use
The AL Stand adapter is intended to deploy a single A-Series

loudspeaker on a standard loudspeaker high stand using the

Z5458 AL Base plate, as shown in the graphic opposite.

Applicable loudspeaker high stands are the d&b Z5009

Loudspeaker stand with winder and the d&bZ5013 Loudspeaker

stand with winder M20.
For low frequency extension, we recommend you to use the single

A-Series loudspeaker driven in CUT mode with one of the following

subwoofers:
▪ V-SUB

▪ V-GSUB

▪ Y-SUB

▪ B6-SUB

Scope of supply | Intended use

1  Z5460 AL Stand adapter

d&b Z5460 Mounting instructions 1.1 en

4