d&b audiotechnik Z5576.050, User Manual

5.2. I/O panel

For systems not using Dante audio, inputs and input links can be

directly connected to the I/O panel

5.2.1. INPUT section

The INPUT section represents the input connectors of the first

amplifier while the other amplifiers are linked within the rack. The

INPUT section allows both analog and digital audio signals to be

fed to the amplifier.

5.2.2. INPUT LINK section

The INPUT LINK section represents the link output connectors of the

last amplifier and allows the linking of further system racks using

the enclosed rack link cable (Z5333 Rack link).

5.2.3. REMOTE section

The REMOTE section allows the daisy chaining of rack assemblies

within a remote network using the enclosed rack link cable (Z5333

Rack Link).

For detailed specifications, please refer to the following sections:

Þ

  Ethernet network

Þ

  CAN-Bus network

I/O panel, rack link example:
2ch Analog audio and Ethernet/OCA
DS10 mode: Red VLAN

Ethernet network
For remote purposes via Ethernet/OCA, it is strongly

recommended to use the prewired configuration in combination

with the DS10 when linking entire rack assemblies, as shown in the

graphic opposite.

It is recommended to link a maximum of up to 6 rack assemblies in

this way.

Do not link/daisy chain entire rack assemblies using the ETH 1/

ETH 2 connector sockets of the I/O panel.

d&b Z5576.050 Manual 1.1 en

14