Connecting Q-SUB and Q1 cabinets
WARNING!
Using Q-SUBs together with Q1 cabinets in a flown array
the Q-SUB cabinets MUST be positioned at the top of the
column.
Fig. 6: Q1/Q-SUB Line Array
Fig. 7: Q1/Q-SUB Stack
Fig. 8: Q-SUB with
Z5013 Loudspeakerstand M20 wit winder
and Q7
Q1 and Q-SUB cabinets use the same sockets in the front grill and side
panels to accept the Z5153 Locking pin 8 mm.
Located on the top of the side panels of the Q-SUB cabinet is an
additional socket that enables the Q1 cabinet to be tilted downwards up
to 6
°
for ground stacked use. In this case the Z5152 Q Front links have
to be rotated through 180
°
before attaching to allow the Q1 cabinet to
be tilted to the front (see picture below).
↵
180°
Fig. 9: Orientation of Z5152 Q Front links
Q-SUB and Q7 cabinets
An M20 threaded flange in the top panel accepts the Z5013
Loudspeaker stand M20 with winder for the deployment of full range
cabinets such as Q7 together with the Z5150 Q Swivel bracket and the
Z5024 High stand adapter.
Q-SUB Manual
(2.1E)
Page 6 of 8
Summary of Contents for Q-SUB
Page 1: ...Q SUB Manual 2 1E ...
