Adjust keeper so that the raised bump
aligns with same on latch.
LLMINSTR000PA
• instr LL MAGNETIC 3 4 13
MAINTENANCE:
REMOVE KEY FROM LOCK AFTER USE. Do not lubricate
with petroleum-based products. Ensure all screws are tightened firmly
and that the latch is kept free of ice, dirt and other debris which could
impair performance. Periodic horizontal and/or vertical adjustment may
be required.
9
12
Hi-Performance Hardware
10
Tube helps protect locks from corrosion.
NOT mandatory.
Hole # 2
on fitting jig is for recessing side
fixing legs on Latch for wood gates
#
2
5
/
8
” (16mm)
11
WIND SCREW TO JOIN COMPONENTS
Removing Screw Covers (if necessary)
1. Insert blade horizontally underneath cover
2. Twist screwdriver and remove
3. See
Step 8
to replace
Adjust keeper so that the raised bump
aligns with same on latch
A
B
#
2
FENCE POST
Poste de cerca
Poteau de clôture
FENCE POST
Poste de cerca
Poteau de clôture
MARK AND INSTALL KEEPER TO POST
CHECK VERTICAL ALIGNMENT
GATE FRAME
CHECK HORIZONTAL ALIGNMENT
Available from -
GatesPlus - www.gatesplus.com.au
