9
Mounting using a Superstick® Mounting Board:
1.
Refer to the instruction sheet packed with each box of SuperStick® Mounting Boards for specific
instructions on mounting with a SuperStick® board.
2.
Also, refer to the instruction sheet for information on Compatible Media, Process Conditions, and
Technical information.
3.
Place the image to be mounted on the adhesive coated side of the mounting board (dull side of the
board). Cover your print with the “cover sheet” as marked (included with each box of SuperStick®
Mounting Boards). Please be sure that the board is completely covered by this sheet
4.
Insert the board into the inlet opening. Ensure the board will enter centered and straight. A gentle
push may be required to start the board into the machine. Hold the edges of the board until it is
engaged in the unit and the laminator begins pulling the board on its own.
The board will feed through the laminator and automatically exit at the rear of the unit.
THE BOARD WILL
BE HOT!
Allow it to lie flat while cooling.
