IMPORTANT SAFEGUARDS
2
• Read all the safety and operating instructions before connecting or using this unit.
• Retain this notice and the owners manual for future reference.
• Adhere to all warnings and operating instructions.
• Do not use this unit near water (e.g. near a bathtub, etc.)
• The wearing of ties or jewelry while operating a laminator may be hazardous to the operator.
• Warning: Do not touch hot surfaces such as heat shoes and heat rollers.
• This unit should be installed so that its location or position does not interfere with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventila-
tion openings; or placed in a built-in installation, such as bookcase or cabinet or against the wall, that
may impede the
À
ow of air through its ventilation openings.
• This unit should be situated away from heat and air ventilation systems such as radiators, heat regis-
ters, stoves, etc.
• This unit should only be connected to a power supply outlet of the voltage, amperage and frequency
marked on its serial tag.
• For 120 volt machines the socket outlet shall be installed near the equipment and be easily
accessible.
• The power supply cord should be routed so that it is not likely to be walked upon or pinched, especially
near the plug, convenience receptacles, or where the cord exits from the unit.
• Unplug the machine during any machine repairs.
• Clean unit only as recommended in this instruction manual.
• Make sure to remove the Feed Table before reversing the machine!
• Care should be taken so that objects do not fall, and liquids are not spilled, into the enclosure through
any openings.
• Caution: The Cutter blade is extremely sharp. Please handle carefully and dispose of properly.
Laminator.com
www.laminator.com
