212-0024-6SS
3
July 30th, 2019
Introduction
The PDU-6SS is designed to provide automotive emergency and public service vehicle equipment installers
with a solid state, single point power distribution system for installed electrical devices. The installation is
fast, reliable and safe. It offers programmable low battery voltage shutdown, programmable timed shut-
down, power distribution and equipment protection. The PDU-16SS provides a direct, easily traceable route
to the input power source avoiding interfering with the vehicles factory wiring harnesses. All circuits are in-
dividually fused (MAXI fuse for the heavy duty outputs & MINI fuses for the standard outputs) and each out-
put has a FUSE OK LED indicator for ease of troubleshooting.
Features
Programmable Low Battery Voltage Shutdown (11V to 13V)
Programmable Timed Shutdown (2 minutes TO 30 hours)
Vehicle Battery Voltage Monitoring
Each output has an LED fuse status indicator
ZERO Current consumption in Standby Mode
Timed Shutdown Mode
Test Mode (all outputs ON for 20 seconds)
Reset Mode (resets all outputs to zero)
6 Outputs (1 battery and 5 timed)
Technical Specifications
Voltage Range: 11-18 VDC
Maximum Current Load: 15A per output, fused at 20A
25A per heavy duty output, fused at 40A
80A total maximum current per PDU
Stand-by Current: 0A
Programmable Low Voltage Disconnect: Programmable from 11VDC
Factory default set at 11.5VDC (10 second delay)
NOTE:
Battery manufacturers recommend to not program low voltage disconnect below 11 VDC
unless the vehicle is equipped with a second battery.
High Voltage disconnect set at 18VDC, (10 second delay)
Programmable timer setup: 1 minute - 99.59 hours. Factory Default 1 minute
Fuse Type: MINI fuse for regular outputs
MAXI fuse for heavy-duty outputs
Operating Temperature: -40
° C to +65° C (-40F to +149F)
Dimensions: L 6.2” X W 4.5” X H 1.5”
Weight: 1.15 Lbs