A
·
X
·
U
·
M User Manual
Version 2.5 - 2011-01-28
AXUM from D&R - Phone: +31 294 418014 - E-Mail:
info@d-r.nl
- 42 -
same or a different node (of the same type). When you import Module 5-8 with an offset of -4
the configuration will be as you expect Module 1-4.
•
User level
Here you can define to which console the module belongs in terms of user level. The user
level depends on the user logged on to the AXUM system. If ‘None’ is selected this node will
always have full access.
•
Configure
When you follow the link configure, you are able to setup the functionality for the different
objects on the node. The sensor and actuator data types determine which function is able to
connect to the object. For a complete list of the functions, you can go to chapter 20 Appendix
C – Engine functions.
Figure 25: Node object configuration (to Axum functions)
•
Default
The gray value is the startup default, this may be changed by assigning a custom value.
When you submit an empty box the object returns to the startup default value.
•
Function
Here you may select which engine function is connected to the object
•
Label
Here you may change the label, which is a shortcut for the selected function, if none is given
the default function label will be used
(the label will appear in the remote configuration
software)
.
•
User level
Per user level you can overwrite the default level per function. If y is selected the function will
be available in the selected user level. If n is selected the function won´t be available. if the y/n
value is shown light gray, the function default user level is used.
In the column headers you may toggle the user level for all objects in the node.
