W E B S T A T I O N M a n u a l P a g e 19
8.6
METERING
Part of the total Webstation package is a software meter application and clock as seen below.
All data is transported over the single USB 2.0 connection. An accurate clock time is taken from the local PC.
The left stereo meter always shows the Master output, the right stereo meter shows the CRM output level following every
signal selected by the CUE switches.
On the right hand side of the display you see signalling functions of some important functions in this mixer.
When the ON-AIR 1 or 2 sign is activated. The NON-STOP switch is active when a Silence is detected in the program signal,
a Mic is on(active) or the the CRM is muted.
On the bottom of this display you can monitor the status of all the input channels; whether they are active, off or standby and
also if the source is selected.