W E B S T A T I O N M a n u a l P a g e 28
12.6
Read/Write Configuration from/to console
To read the configuration from the console into the
Webstation Configuration Manager
you need to press the ‘READ’ button.
After the configuration has been read the firmware field shows the current firmware in the console after the read command.
Once the configuration is read successfully, adjustments can be made and written back to the console or saved as a preset.
Pressing the ‘WRITE’ button uploads the current configuration in
Webstation Configuration Manager
to the console. The con-
figuration is directly active but not saved internally. The configuration is lost after a power off.
12.6.1
Store Internal
The
Store Internal
button stores the current configuration in the console to persistent memory (EEPROM). This means the con
-
figuration is still active after a power off. A warning will be prompted to make sure you want to overwrite the internal saved con
-
figuration.
12.7
Configuration Presets
Webstation Configuration Manager
is able to import/export the configuration from/to a preset file. These preset files have the
.xml file extension. A preset file includes the module and master settings.
12.7.1
Create Preset
Saving a preset can be done by pressing File->Save(as) from the menu bar.
12.7.2
Load Preset
Loading a preset can be done by pressing File->Open from the menu bar and selecting the preset file.
