19
Using for the First Time
Charging the Battery
* Charging the Battery before using your player.
* While the player is connected to the computer via USB cable, it will charge its built-in
battery. The battery is fully charged in about 3 hours.
* Check if the player is connected to a high-power USB2.0 port. Some low-power USB
ports available in keyboards and other USB hubs may not provide enough power to
charge or sync the player.
* If the computer is in sleep mode, the player may not be charged.
The Remaining Battery Charge icon indicates the remaining time the battery can be
used. The more the battery is used, the fewer the number of segments in the icon.
2. During Power On
Connect it to the computer using the USB cable supplied in the package during
the player powered on. It will charge its built-in battery and appears as the figure.
In the normal Windows environment, as soon as the
cable or simple USB jack is connected, the message
"Searching for new device" appears and USB driver is
installed automatically. For Windows 98SE, put the
included CD-ROM in your disk drive, then follow the
instructions on your PC screen to install the USB drive.
Connecting Mini Player
Note: While connecting to PC, tracks and operations cannot be applied. Pulling out the
PC connection cable from the player before your listening to music / viewing a picture
and so on.
18
This page was intentionnaly left blank
Dane-Elec_MiniPlayer SL_manual
donderdag 29 november 2007 12:13:07
