27
Chapter 4: Connecting So Smart to a Network
4.3 Wireless Network
So Smart player is equipped to be connected to your
Wireless Network and is capable of streaming media files
directly from your PC.
Upon completing the setup as described below, the
So Smart player will acquire the IP address automatically
from your router.
NOTe: Try to use Wireless setup in an environment with
minimal interference. Avoid Wireless setup if streaming
hi-def video files.
Under SeTUP menu, select “NeTWORK”. Use the arrow
keys and select eNAbLe. Navigate and eNTeR / SeLeCT the
“Wireless” Network option.
So Smart HDMI
Once the “Wireless” option is chosen,
Select “Wireless Apply” setup to apply your prefered
setting. the system will try to acquire the IP address
automatically from the router
The Advanced “WIReLeSS” settings menu (as shown
under) will be automatically displayed for modifying
and configuring wireless settings.
Selecting “Scan eSSID” and eNTeR or Autoscan eSSID
(depending on your firmware version.).
You must enter the SSID of Access Point (AP) or your router.
Select your network name.
CHANNeL: Choose the radio channel being used by your
network router or Auto is default.
eNCRYPTION: Unless you are running encryption settings
on your Router, choose NONe. (refer: next page)
WeP KeY: If using WeP-encryption on router, manually input
WeP key here. (refer: next page)
Select “Apply” to apply wireless network settings.
SUCCeSS versus FAIL shows network connectivity status
Press SeTUP button on the So Smart Remote to apply and
confirm all setup options and configurations.
