background image

GB

103E7

6

Your 103E7 timeswitch allows you to switch your heating and hot 
water on and off  at times that suit you.

The 103E7 can provide 3 ON periods and 3 OFF periods each day and 
can off er either 7-day control (a diff erent programme for each day of 
the week) or 5/2 day control (one set of programmes for weekdays 
and a diff erent set for weekends).

2.0  Before you start/Making a Full Reset

• 

Open the fl ap on the front of the unit. 

•  Press and hold 

+1HR

 and 

MAN

 

buttons.

•  Press and release the 

R/S

 button 

using a small, non-metallic object (e.g. 
matchstick, biro tip)

• Release 

+1HR

 and 

MAN

 buttons.

This will reset the unit and reinstate the 
preset programmes.

2.1  Choice of 24hr or AM/PM display

Press and hold 

DAY 

and

 NEXT ON/OFF

 

buttons for 1.5 seconds to toggle between 
24hr clock and AM/PM display, as required. 

2.2  Setting the Date and Time

Setting the Date

Press and hold 

PROG

 for 5 seconds to 

display year.

PROGRAMME

NEXT/ON/OFF

+

-

DAY

COPY

PROGRAMME

NEXT/ON/OFF

+

-

DAY

COPY

1.0 User Instructions
1.1 Your Timeswitch

PROGRAMME

NEXT/ON/OFF

+

-

DAY

COPY

R/S

Summary of Contents for 103E7


















Reviews: