1.1 Description
The back-channel cooling (in-back/out-back) kit is designed for
the D5h/D6h and D7h/D8h frequency converters. Instead of
airflow entering the bottom of the unit and exiting the top,
the kit directs air in from and out of the back of the unit.
1.2 Kit
Part
Numbers
Part number
Kit description
176F3530
In-back/out-back cooling kit for the D5h/D6h
176F3531
In-back/out-back cooling kit for the D7h/D8h
Table 1.1 Part Numbers for D5h/D6h and D7h/D8h In-back/
Out-back Cooling Kits
1.3 Items
Supplied
Top plate assembly
1
M5x12 screw/washer (12) D5h/D6h or (18) D7h/D8h
2
Top plate (1)
3
Gasket between top plate and frequency converter (1)
Illustration 1.1 Top Plate Components
Base plate assembly
1
Bottom bracket (1)
2
Gasket between base plate and frequency converter (1)
3
Front brace (removed from base of frequency converter)
4
Base plate (1)
5
Gasket, bottom cover (1)
6
Outer hole in bottom cover gasket
7
Bottom cover (1)
–
M5 nut (8)
–
M5x16 Torx screw (2)
–
M5x12 screw with washer, (5) D5h/D6h or (7) D7h/D8h
Illustration 1.2 Base Plate Components
Enclosure gaskets
1
Gasket, slot (1) D5h/D6h or (2) D7h/D8h
2
Gasket, strip (2)
Illustration 1.3 Gasket Set for Enclosure
Installation Instructions
In-back/Out-back Cooling Kit for D5h/D6h and
D7h/D8h Enclosures VLT® Series FC 102, FC 202,
and FC 302
Danfoss A/S © 10/2016 All rights reserved.
MI70F102
