4 Requirements for Installation
4.1 Mechanical Mounting
4.1.1 Safety Requirements of Mechanical Installation
WARNING
HEAVY LOAD!
Unbalanced loads can fall and loads can tip over. Failure to take proper lifting precautions increases risk of death,
serious injury, or equipment damage.
•
Never walk under suspended loads.
•
Wear personal protective equipment.
•
Observe the weight of the unit and ensure that proper lifting equipment is used.
•
The center of gravity can be in an unexpected area. If that is not observed, the unit can fall over or tilt
unexpectedly during lifting and transport. Check the center of gravity, before lifting the load.
•
When installing the filter, use the lifting eyes on both sides to lift the filter.
Lift the filters using the dedicated lifting eyes. For enclosure X3-V3 to X8-V3 extra lifting eyes are placed in the centerline.
CAUTION
For filters with external fan, place hooks in the lifting eyes to lift the unit. Do not attempt to use lifting bars or other
methods with equipment going through the lifting eyes, since this could harm the fan.
CAUTION
Do not lift the unit with the IP 21/NEMA 1 kit top cover mounted. This could damage the top cover or compromise the
safety during lifting.
and
show the recommended lifting methods for the different AHF types.
Requirements for Installati...
VLT
®
Advanced Harmonic Filter AHF 005/AHF 010
18
Danfoss A/S © 05/2019 All rights reserved.
MG80C602
4
4
Summary of Contents for AHF 010
Page 2: ......
