D
US
© Danfoss | Climate Solutions | 2023.09
AQ450437934291en-US0301 | 5
1
|
Safety
These assembly instructions describe the standard version of the compressors named in the ti-
tle manufactured by Bock. Bock refrigerating compressors are intended for installation in a
machine (within the EU according to the EU Directives 2006/42/EC Machinery Directive, 2014/68/EU
Pressure Equipment Directive, outside the EU according to the respective national regulations and
guidelines).
Commissioning is only permissible if the compressors have been installed in accordance with these
assembly instructions and the entire system into which they are integrated has been inspected and
approved in accordance with legal regulations.
The compressors are intended for use with CO
2
in transcritical and/or subcritical systems in compli-
ance with the limits of application.
Only the refrigerant specified in these instructions may be used.
Any other use of the compressor is prohibited!
1.3 Intended use
The compressor may not be used in potentially explosive
environments!
1.4 Qualifications required of personnel
Inadequately qualified personnel poses the risk of accidents, the
consequence being serious or fatal injury. Work on compressors
must therefore only be performed by personnel with the
qualifications listed below:
• e.g., a refrigeration technician, refrigeration mechatronics engineer.
• As well as professions with comparable training, which enable
personnel to assemble, install, maintain and repair refrigeration and
air-conditioning systems.
• Personnel must be capable of assessing the work to be carried out
and recognizing any potential dangers.
