Inv. Nom. Current ...............................................[1636]
Inv. Max. Current ................................................[1637]
SL Control State ...................................................[1638]
Control Card Temp .............................................[1639]
External Reference ...........................................[1650]
Feedback [Unit] ...................................................[1652]
Digital Input .........................................................[1660]
Terminal 53 Switch Setting ............................[1661]
Analog Input 53 .................................................[1662]
Terminal 54 Switch Setting ............................[1663]
Analog Input 54 ..................................................[1664]
Analog Output 42 [mA] ...................................[1665]
Freq. Input #29 [Hz] ...........................................[1667]
Freq. Input #33 [Hz] ...........................................[1668]
Pulse Output #27 [Hz] .......................................[1669]
Pulse Output #29 [Hz] .......................................[1670]
Relay Output [bin] ..............................................[1671]
Counter A .............................................................[1672]
Counter B ...............................................................[1673]
Digital Inputs........................................................[3440]
Digital Outputs ...................................................[3441]
Select a variable for display in line 1, left position.
0-21 Display Line 1.2 Small
*Motor Current [A] ............................................[1614]
Options are the same as in par. 0-20
0-22 Display Line 1.3 Small
*Power [kW] ..........................................................[1610]
Options are the same as in par. 0-20.
0-23 Display Line 2 Large
*Frequency [Hz] .................................................[1613]
Options are the same as in par. 0-20.
0-24 Display Line 3 Large
* Analog Input 53 ...............................................[1662]
Options are the same as in par. 0-20.
0-25 My Personal Menu
Define up to 20 parameters to include in the Q1
Personal Menu, accessible via the [Quick Menu]
key on the LCP. The parameters will be displayed
in the Q1 Personal Menu in the order they are
programmed into this array parameter. Delete
parameters by setting the value to « 0000 ».
0-4* LCP Keypad
Enable and disable individual keys on the LCP
keypad.
0-40 [Hand on] Key on LCP
Option:
Disabled ........................................................................ [0]
*Enabled ....................................................................... [1]
Password....................................................................... [2]
Function:
Select
Disabled [0]
to avoid accidental start of the
frequency converter in Hand mode. Select
Password
[2]
to avoid unauthorised start in Hand mode. If par.
0-40 is included in the Quick Menu, then define the
password in par. 0-65
Quick Menu Password.
0-41 [Off] Key on LCP
Options are the same as in par. 0-40.
0-42 [Auto on] Key on LCP
Options are the same as in par. 0-40.
0-43 [Reset] Key on LCP
Options are the same as in par. 0-40.
0-5* Copy / Save
Copy parameter settings between set-ups and to/
from the LCP.
0-50 LCP Copy
Option:
*No copy ...................................................................... [0]
All to LCP ....................................................................... [1]
All from LCP ................................................................. [2]
Size indep. from LCP ................................................ [3]
Function:
Select
Transfer to LCP all parameters [1]
to copy
all parameters in all set-ups from the frequency
converter memory to the LCP memory.
Select
Transfer from LCP all parameters [2]
to copy
all parameters in all set-ups from the LCP memory
to the frequency converter memory.
Select
Transfer from LCP size indep. parameters
[3]
to copy only the parameters that are inde-
pendent of the motor size.
0-51 Set-up Copy
Option:
*No copy ...................................................................... [0]
Copy to set-up 1 ......................................................... [1]
Copy to set-up 2 ......................................................... [2]
Copy to set-up 3 ........................................................ [3]
Copy to set-up 4 ........................................................ [4]
Copy to all .................................................................... [9]
Function:
Select
Copy to set-up 1 [1]
to copy all parameters in
the present edit set-up (defined in par. 0-11
Edit
Set-up
) to Set-up 1. Likewise, select the option
corresponding to the other set-up(s).
Select
Copy to all [9]
to copy the parameters in the
present set-up over to each of the set-ups 1 to 4.
0-6* Password
Define password access to menus.
0-60 Main Menu Password
Function:
Define the password for access to the Main Menu
via the [Main Menu] key. If par. 0-61
Access to Main
Menu w/o Password
is set to Full access [0], this
parameter will be ignored.
0-61 Access to Main Menu w/o Password
Option:
*Full access .................................................................. [0]
Read only ...................................................................... [1]
No access ...................................................................... [2]
Function:
Select
Full access [0]
to disable the password defi-
ned in par. 0-60
Main Menu Password
. Select Read
only [1]
to prevent unauthorised editing of Main
Menu parameters. Select
No access [2]
to prevent
unauthorised viewing and editing of Main Menu
parameters. If
Full access [0]
is selected then para-
meters 0-60, 0-65 and 0-66 will be ignored.
0-65 Quick Menu Password
Function:
Define the password for access to the Quick Menu
via the [Quick Menu] key. If par. 0-66
Access to
Quick Menu w/o Password
is set to
Full access [0]
,
this parameter will be ignored.
0-66 Access to Quick Menu w/o Password
Option:
*Full access .................................................................. [0]
Read only ..................................................................... [1]
No access ...................................................................... [2]
Function:
Select
Full access [0]
to disable the password defi-
ned in par. 0-65
Quick Menu Password
.
Select
Read only [1]
to prevent unauthorised
editing of Quick Menu parameters.
Select
No access [2]
to prevent nauthorised
viewing and editing of Quick Menu parameters.
If par. 0-61
Access to Main Menu w/o
Password is
set to Full access [0] then this parameter will be
ignored.
Parameters: Load and Motor
1-0* General Settings
Define whether the frequency converter operates
in speed mode or torque mode; and whether the
internal PID control should be active or not.
All parameters from 1-01 (included) to 1-81 (in-
cluded) are read only. Just the 1-13 remain acces-
sible for compressor selection.
1-00 Configuration Mode
Option:
*Speed open loop .................................................... [0]
Process ......................................................................... [3]
Function:
Select the application control principle to be
used when a Remote Reference (via analog input)
is active. A Remote Reference can only be active
when par. 3-13
Reference Site
is set to [0] or [1].
Speed open loop [0]
: Enables speed control (wit-
hout feedback signal from motor) for almost
constant speed at varying loads.
Process [3]
: Enables the use of process control
in the frequency converter. The process control
parameters are set in par. groups 7-2* and 7-3*.
This parameter cannot be adjusted while the
motor is running.
1-01 Motor Control Principle
VVCplus ......................................................................... [1]
Flux sensorless .......................................................... [2]
Motor compressor dependant cannot be modified.
1-03 Torque Characteristics
Motor compressor dependant, cannot be modified.
1-04 Overload Mode
Motor compressor dependant, cannot be modified.
1-05 Local Mode Configuration
Cannot be modified, as Config Mode P1-00.
1-10 Motor Construction
Motor compressor dependant, cannot be modi-
fied (Asynchronous).
1-13 Compressor selection
Allows compressor/refrigerant set selection
1-2* Motor Data
Parameter group 1-2* comprises input data for the re-
levant compressor selected in Par. 1-13. These parame-
ters cannot be modified from the CD302 data-base.
1-20 ..................................................Motor Power [kW]
1-21 ...................................................Motor Power [HP]
1-22 ..........................................................Motor Voltage
1-23 ....................................................Motor Frequency
1-24 ..........................................................Motor Current
1-25 .......................................... Motor Nominal Speed
1-3* Adv. Motor Data
Parameter group 1-2* comprises input data for the re-
levant compressor selected in Par. 1-13. These parame-
ters cannot be modified from the CD302 data-base.
1-30 ........................................... Stator Resistance (Rs)
1-31 ............................................ Rotor Resistance (Rr)
1-33 .........................Stator Leakage Reactance (X1)
1-34 ..........................Rotor Leakage Reactance (X2)
1-35 ............................................ Main Reactance (Xh)
Instructions
AN000086420674en-000201 | 17
© Danfoss | DCS (CC) | 2019.04
