Symbol
Description
Operating mode Off.
All functions are off. Components inside the heat pump are
still current carrying.
Operating mode Service.
In this operating mode the heat pump is deactivated and will
not produce hot water or heating. All internal functions off.
Components inside are still current carrying. External func-
tions are on.
Operating mode Auxiliary heater only.
External functions are on. Compressor is off, thus unable to
produce any heating or tap water.
This button is only visible if auxiliary/immersion heater(s) are
installed in the system.
External auxiliary heater(s) can NOT produce hot tap water.
Operating mode On.
All activated functions are on.
Press to go to page 2 where functions can be activated/
deactivated temporarily.
See the example in the table below.
N
The list below shows examples of selected
functions on page 2 in Operating mode.
Functions not activated from factory must be
enabled in Settings before they can be activa-
ted and used.
User Guide
DHP-M
VUMIB102
Danfoss Heating Solutions
14