8
VI.KT.F2.02
© Danfoss 06/2008
DH-SMT/DK
DH-SMT/DK
VI.KT.F2.02
© Danfoss 06/2008
9
Daily use
Temperatures
Push any button to switch on the backlight.
.#$
$,/D >BZ
Setting the desired DHW temperature
Change the desired temperature.
Temperature overview
2 sec.
Push the button to see the sensor (S3-S4) temperatures.
Change between the temperature displays:
S3:
Actual flow temperature
Desired flow temperature
=#$2D >B
= "3D >C
S4:
Actual return temperature
Desired return temperature limitation
S4 lim. T 50@
S4 act. T 24@
If the temperature value is displayed as
"- -"
the sensor in question is not connected.
"- - -" the sensor is short-circuited.
Select control mode
During scheduled operation (AUTO), the symbols will show you the control mode.
$#-$2# 8
.#$ [
Change the mode (AUTO, COMFORT, SETBACK, or STANDBY).
Set your personal schedule
It is only possible to set the personal schedules if the ECL Comfort 110 controller has a built-in
ECA 110 timer program.
<Bn:=n:ABF=<
$#-$2# 8[
This display will show the current day and time.
Choose the day for which you wish to change the settings.
Today’s schedule
The first display will show you the start of the first comfort period (‘Start1’). See or
change the start of this period.
The first bar will blink.
$#QQQQNaQQQaaQ
3 13;:CF::
See or change the end (‘Stop1’) of the first comfort period.
The next bar will blink.
$#QQQQNaMQQaaQ
3./;;<F::
