10 06/2015
VIJPD102
Danfoss Heating Solutions
1.11 Resetting eco to default settings
1.
2.
Remove the battery cover and take out one
battery.
Press and hold , Keep holding while rein-
serting the battery. The screen will show all
functions then return to a large flashing
M
.
1.12 Removing an adapter from eco
1.
2.
Remove the battery cover.
Insert a small Allen key or similar into the lock-
ing hole to lock the adapter ring.
3.
4.
With the Allen key locking the adapter ring,
turn the adapter in the shown direction.
Put back the battery cover.
Mount eco on another valve adapter accord-
ing to the instructions supplied with the
adapter.
Installation Guide
eco Intelligent Radiator Thermostat
