Protection class
*
Standard protection class
IP65 protection class
+IP67
IP67 protection class
IP67 protection class
Rotation sensor
(resolver)
*
None
No resolver
+RES1
Resolver
In-built non contacting resolver, 4-pole
pair
Winding temperature
sensors
*
Temperature surveillance
3 x PT100 (two wire) in windings
+TEMP4 Redundant temperature
surveillance
6 x PT100 (two wire) in windings
(reLVB1)
Conformity according to standards
The electric machine has been designed to be in conformity with the following directives and to
meet the requirements speci ed in the following standards:
Table 3. Applicable Directives and standards
Standard
Explanation
Low Voltage Directive 2006/95/EC
(until 19.4.2016) and Low Voltage
Directive 2014/35/EU (from
20.4.2016 onwards)
Electrical equipment means any equipment designed for use with a
voltage rating of between 50 and 1000 V for alternating current.
This electric machine is subject to the Low Voltage Directive
2006/95/EC or 2014/35/EC.
IEC 60034-1:2010
Rotating electrical machines - Part 1: Rating and performance
IEC 60034-5:2001/A1:2007
Rotating electrical machines - Part 5: Degrees of protection provided
by the integral design of rotating electrical machines (IP code) -
Classi cation
IEC 60034-6:1991
Rotating electrical machines - Part 6: Methods of cooling
IEC 60034-7:1992/A1:2001
Rotating electrical machines - Part 7: Classi cation of types of
construction, mounting arrangements and connection box position
(IM Code)
IEC 60034-8:2007/A1:2014
Rotating electrical machines - Part 8: Terminal markings and direction
of rotation
IEC 60034-14:2004/A1:2008
Amendment 1 - Rotating electrical machines - Part 14: Mechanical
vibration of certain machines with shaft heights 56 mm and higher -
Measurement, evaluation and limits of vibration severity.
Warranty
Danfoss offers warranty against defects in workmanship and materials for its products for a period
of twelve (12) months from commissioning or eighteen months (18) from delivery (Incoterms-
EXW), whichever occurs rst.
In order for the warranty to be valid, the customer must follow the requirements of this and all
related documents, especially those set out in the product installation and maintenance, as well as
the applicable standards and regulations in force in each country.
Defects arising from the improper or negligent use, operation, and/or installation of the
equipment, non-execution of regular preventive maintenance, as well as defects resulting from
external factors or equipment and components not supplied/recommended by Danfoss, will not
be covered by the warranty.
The warranty will not apply if the customer at its own discretion makes repairs and/or
modi cations to the equipment without prior written consent from Danfoss.
EM-PMI240
1. General information
| BC355256345493en-000103
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020 | 5
Summary of Contents for EM-PMI240
Page 1: ...User Guide Motor Generator EM PMI240 danfoss com...
Page 59: ......
