4.3.2 Extraction process for TMC cutting knife
WARNING!
Risk of fire
During cutting, there is a risk for life and health due to the fire ha-
zard from flying sparks.
•
Only operate the machine with a spark extinguisher.
•
Clean the machine and spark extinguisher after each use
(see “Cleaning” in Section 5).
1.
Attach the adapter (2) to the extraction nozzle (1) of the ma-
chine.
2.
Attach the angle adapter (3) to the adapter (2).
3.
Attach the spark extinguisher (4) to the angle adapter (3).
4.
Attach the metal hose to the spark extinguisher (4) and extrac-
tion device (5).
We recommend an extraction fan with 100 mm water column and
a capacity of 4 m³/min, as well as a filter element suitable for this
purpose.
Summary of Contents for ET9650
