6.
Adjust the height using the height adjustment screws (6).
The distance between the cutting knife (6) and the knife protec-
tion (7) must be 20 mm.
ATTENTION!
Risk of damage to machinery!
If the cutting knife is at an angle, this will result in damage to the
cutting knife and machine.
• Make sure that all four height adjustment screws are equally
adjusted.
• Check that the cutting knife is straight.
7.
Tighten the locking screws (5).
8.
Use a suitable measuring aid to check the adjusted height.
The distance between the cutting knife (6) and the knife protec-
tion (7) must be 20 mm.
9.
Check that the cutting knife is straight.
10. Attach the side cover (2).
11. Attach the hose guide (1).
12. Insert the motor maintenance door (3) and close it.
