[16-53]
Digi Pot Reference
[16-54 ]
Feedback 1 [Unit]
[16-55 ]
Feedback 2 [Unit]
[16-56 ]
Feedback 3 [Unit]
[16-60 ]
Digital Input
[16-61
]
Terminal 53 Switch
Setting
[16-62 ]
Analog Input 53
[16-63
]
Terminal 54 Switch
Setting
[16-64 ]
Analog Input 54
[16-65 ]
Analog Output 42 [mA]
[16-66 ]
Digital Output [bin]
[16-67 ]
Freq. Input #29 [Hz]
[16-68 ]
Freq. Input #33 [Hz]
[16-69 ]
Pulse Output #27 [Hz]
[16-70 ]
Pulse Output #29 [Hz]
[16-71 ]
Relay Outputs [bin]
[16-72 ]
Counter A
[16-73 ]
Counter B
[16-75 ]
Analog In X30/11
[16-76 ]
Analog In X30/12
[16-77 ]
Analog Out X30/8
[16-80 ]
Fieldbus CTW 1
[16-82 ]
Fieldbus REF 1
[16-84 ]
Comm Option STW
[16-85 ]
FC Port CTW 1
[16-90 ]
Alarm Word
[16-91 ]
Alarm Word 2
[16-92 ]
Warning Word
[16-93 ]
Warning Word 2
[16-94 ]
Extended Status Word
[16-95]
Extended Status Word
2
[16-96 ]
Prev.
Maintenance
Word
9-27 Parameter Edit
Option:
Function:
Parameters can be edited via Profibus, the standard RS485 interface, or the LCP.
[0]
Disabled
Disables editing via Profibus.
[1]
*
Enabled
Enables editing via Profibus.
9-28 Process Control
Option:
Function:
Process control (setting of Control Word, speed reference, and process data) is possible via either Profibus or
standard fieldbus but not both simultaneously. Local control is always possible via the LCP. Control via process
control is possible via either terminals or fieldbus depending on the settings in par. 8-50 to 8-56.
3. Parameter Description
VLT
®
HVAC Drive Programming Guide
102
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3
