Parameter
number:
1892
Unit:
%
Data type:
int16
Access type:
Read
P 5.12.1.4 Process PID Gain Scaled Output
This parameter shows the output value from the process PID controller after reaching a clamp limit and scaling the resulting value with
consideration to the gain.
Default value:
0.0
Parameter type:
Range (-200.0–200.0)
Parameter
number:
1893
Unit:
%
Data type:
int16
Access type:
Read
P 5.12.1.5 Feedback Value
Use this parameter to view the feedback resulting from the selection of scaling in
P 5.5.3.1 Reference Range
,
P 5.5.3.3 Reference
Maximum
, and
P 5.5.3.4 Reference Minimum
.
Default value:
0.000
Parameter type:
Range (-4999.000–4999.000)
Parameter
number:
1652
Unit:
Process Ctrl Unit
Data type:
int32
Access type:
Read
7.6.11.2
Feedback (Menu Index 5.12.4)
P 5.12.4.1 Feedback 1 Resource
Use this parameter to select which drive input is treated as the feedback source.
Default value:
0 [No function]
Parameter type:
Selection
Parameter
number:
720
Unit:
–
Data type:
enum
Access type:
Read/Write
The following are the selections for the parameter:
Selection number
Selection name
0
No function
1
Analog Input 33
2
Analog Input 34
4
Frequency Input 18
P 5.12.4.2 Feedback 2 Resource
Use this parameter to select which drive input is treated as the source of the feedback.
178
| Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
Summary of Contents for iC2
Page 1: ...iC2 Micro Frequency Converters Application Guide drives danfoss com...
Page 2: ......
Page 291: ......
