18
MG.10.G1.51 – VLT is a registered Danfoss trademark
Gateway InterBus-S
Setting the PDU length in PCP
On the basis of the possibility of having 14
VLTs connected to the gateway, there is a
need for an extended PDU length. The
following example shows how in the SPS
start-up the PDU length can be changed
in CRL. For further information concerning
the PCP Communication please see the
manual for the InterBus-S-Master.
All start-up components first branch into
FB210, which carries out the configu-
ration of the InterBus-S-Master assembly.
■
Example of pr
ogram for Siemens S5-115U