6
VISGY45X © Danfoss 04/2011
Installation Guide
Danfoss Link™ PR
Note! Do not install electric floor heating system without
a floor sensor, when the heating element is installed on or
beneath wooden surfaces and other surfaces sensitive to
temperature!
Installation
The Danfoss Link™ wireless system’s transmission range is
sufficient for most applications; however each building has
different obstacles affecting communication and maximum
transmission distance .
If communication problems occur Danfoss suggests that
accessories would be required to support the system, such as
repeaters . In exceptional cases the wireless system may not be
suitable for your installation .
Please be aware of the following, when installing Danfoss
Link™ PR:
Installation and placement must be according to
local building regulations.
Operation mode
Danfoss Link™ PR supports two types of operation modes:
1 .
ON/OFF switching.
2 .
Heating regulation
(when using Danfoss Link™ PR as heat-
ing regulation in a room you also have to install a Danfoss
Link™ RS) .
