8
VISGY45X © Danfoss 04/2011
Installation Guide
Danfoss Link™ PR
When the Danfoss Link™ PR has been
added to the Danfoss Link™ CC Central
Controller, a network test should be
performed .
For more information on network tests,
see the Danfoss Link™ CC instruction
manual:
Configuration 8:
Perform network test.
Perform network test
Green LED ON
Relay OFF/Standby
Red LED ON
Relay ON/Heating
Green LED fast flash
Inclusion or link test
Red LED short flash
Inclusion not OK
Link test not OK
Trouble shooting
1 .
Disconnect the unit to cut off power .
Hold the install button down
while reconnecting power . Keep
pressing the install button until
the LED gives a red flash (approx .
5 seconds) .
Factory reset