14 11/2013
VIIDH102
Danfoss Heating Solutions
User Guide
living connect®
4.3 Testing the connection
1.
2.
3.
Press for at least 3 seconds
until
M
is displayed.
Press until
LI
is displayed.
Press to make the connec-
tion.
LI
disappears when the
connection is made.
If no connection can be
made, the alarm and antenna
symbols will both be flashing.
Refer to “Technical questions”
at
www.living.danfoss.eu
5. Additional settings
5.1 Adjusting to radiator/room conditions
Press for at least 3 seconds until
M
is displayed.
Press
until
Pb
is displayed, then press .
The default setting is
P2
.
Use
P1
if the radiator appears oversized for the room.
Use
P3
if it is undersized.*
Select
P1
,
P2
or
P3
using
and exit using .
* The frequency of
P1
,
P2
and
P3
regulation varies to com-
pensate for radiator over/under sizing.
