The CS100 is produced with a pre-installed SIM card and with a default configuration that allows the
direct connection of the device to the PLUS+1
®
Connect portal.
The visibility of the device on the PLUS+1
®
Connect portal is linked to the activation of the device, if not
activated with a specific data plan the device is not visible on the portal.
Connect the device and ensure the device turns on.
The LED light correct sequence:
•
The LED lights up green constantly during the first second.
•
The LED starts to flash.
Problem with connection to PLUS+1® Connect portal
After connecting to power supply, the LED should then follow the correct sequence. If the LED lights up
green and becomes red or stops during one of the steps, there is a problem. Contact the helpdesk or your
CS PAE. EID number is required in order to help you.
Technical Information
PLUS+1 Connect CS100 IoT Gateway — Professional Install Only
PLUS+1® Connect portal
20 |
©
Danfoss | October 2020
BC299456869228en-000101