Installation & Operation Manual
RX Kits. For roof and gutter deicing applications
10 | © Danfoss | FEC | 2020.02
AQ00008644904301-010201 / 088L3371
Installing the Cable using the Roof Clips
Top of Triangles: lift the shingle gently using the putty knife. Insert the clip and press the shingle down
firmly; it will reseal itself in hot weather.
Bottom of triangles along roof edge: Create a drip loop over the edge of the roof, leaving at least 2”
between the bottom of the drop loop and the gutter bottom.
Figure 10.
Figure 11.
Top of Triangles: lift the shingle gently using the putty knife. Insert the clip and press the shingle down
firmly; it will reseal itself in hot weather.
Tighten clips and spacers using fingers or pliers once installation is complete; do not use a hammer.
Using a weighted string may help with installation of cables in downspouts.
drip loop
Figure 12.
Figure 13.
