GB
PL
DANFOSS HEATING
23
Changing preset programmes for AB programming
(Installer option 41 must be set to 5-2 day mode)
Press and hold
PROG
and
V
for 3 seconds. The
display will change to the fi gure opposite. This
will take you into
User Advanced Programming
option 1.
Use
Λ
and
V
keys to enable or disable the function
(1=enabled, 0=disabled).
Press
PROG
for 5 seconds until the display returns
to previous
RUN
mode.
Press
PROG
once, the display will change to show
the default days assigned to programme “A” (days
MON, TUE, WED, THU, FRI).
Use the
+
and
-
keys to scroll forwards or backwards
through the days of the week.
To deselect a day press
V
, (for example TUE). To
select a day press
Λ
(for example SUN).
Any deselected days are automatically assigned to programme “B”.
Programming “A” programme days and events
a) Press
PROG
until the fi rst preset time and/or temperature (Event 1
for Programme A) appears in display.
b) Use the
+
and
-
buttons to adjust the
TIME
(press and hold to change in 10 minute
increments).
c) Use
the
Λ
and
V
buttons to adjust the required
TEMPERATURE
.
d) Press
NEXT
to move to the next preset time and temperature (CH
only) (Event 2).
e)
Repeat steps b, c, & d to programme the remaining events.
