TP9000
30
Temporary override buttons
Sometimes you may need to change the way you use your
Heating temporarily, i.e. due to unusually cold weather. The
TP9000 has two convenient overrides which can be selected
without aff ecting the set programme.
The grey buttons next to the
radiator and tap symbol
is
the + HRS button for heating and the
BOOST
button for
the Hot Water.
For Water display mode, pressing this button once, twice or
three times when the system is in
OFF
,
AUTO
or
ALLDAY
mode will cause the Hot Waterto remain on for an extra 1,
2 or 3 hours if already on, or will switch the water on for 1, 2
or 3 hours if currently off .
BOOST
+1, +2 or +3 HRS
will be
shown in the display.
For Heating display mode, pressing the +HRS button
once, twice or three times will extend the current
time/temperature period for 1, 2 or 3 hours, but
does
not
operate if the thermostat is in the
OFF
or
FROST
PROTECTION
mode. +1, +2 or +3
HRS
will be shown in the
display. Pressing this button for a fourth time will cancel
the
+HRS
BOOST
function.
+1/+2/+3 hr
override
Mode select
button (auto/all
day/on/off )
CH/HW
button
Temperature
adjustment
buttons
INFO button
RESET
+ HRS
BOOST
