GB
PL
DANFOSS HEATING
33
User Advanced
Programming Options
Important:
The thermostat has been set in the factory to suit most
situations, however, there are additional optional settings which can
improve the comfort, convenience and energy eff ectiveness of your
thermostat. These are set in the
User Advanced Programming
and
Installer Advanced Programming
modes.
To access User Advanced Programming
Press and hold
V
and
PROG
for 3 seconds. This will take you into
User Advanced Programming
. Use
+
and
-
keys to scroll backwards
and forwards between options then
Λ
and
V
keys to change option
settings. The fl ashing digit on the right hand of the display indicates the
number of the selected option.
Option 1 - Enable or disable A/B programming
(Option 41 and/or 61 set to 5+2)
This enables or disables the A/B programming option.
Press
+
until Option 1 is displayed, use
Λ
and
V
to
select required setting.
Setting 0
Disabled, unit operates as 5+2
Setting 1
Enabled: activates A/B programming
Option 2 - Enable/Disable Advanced Programming (Option 41
and/or 61 set to 7 Day)
This option enables or disables the Advanced Copy
Functionality. Press + until option 2 is selected, use
Λ
or
V
to select required setting
Setting 0
Advanced Copy disabled (standard copy mode)
Setting 1
Advanced Copy enabled
