14 of 132
M-SV-001-EN Rev.E
Introduction
NOTE
• • • DANGER • • •
• • • CAUTION • • •
•
Index
- this section provides an index to assist
in searching for information described in this
manual
The following conventions are used in this
manual:
•
Procedures
- all user procedures are listed in
numerical steps, unless it is a one-step procedure.
A one-step procedure is shown as a bullet.
•
User Action Required (software)
- if a user is
required to take action in a software procedure,
the action will be shown in bold. Example; When
the Login window opens,
type in your name
and password
.
•
Monitoring Program Window Names
- all
window names will be in italic. Example
Compressor Controller window
.
•
External References
- references to items not
within this manual are underlined. Example; Refer
to the Installation and Operation Manual for
installation procedures.
DTC is committed to quality service and customer
satisfaction as outlined by our Quality Policy:
Danfoss Turbocor is dedicated to satisfying our
customers by providing “Best in Class” in terms of
quality, value, and on-time delivery while striving
for continuous improvement.
Safety precautions must be observed during
installation, start-up, and service of the
compressor due to the presence of pressure
and voltage hazards. Only qualified and
trained personnel should install, start up, and
service Danfoss Turbocor compressors. Safety
information is located throughout the manual
to alert service personnel of potential hazards
and is identified by the headings
DANGER
and
CAUTION
.
A
DANGER
notification signifies an essential
operation or maintenance procedure, practice,
or condition which, if not strictly observed, could
result in injury to or death of
personnel
or long-
term health hazards. A Danger notification is
displayed in the format shown in Figure 1.
Consideration for personal safety and equipment
safety is very important. The following sections
cover safety precautions and methods that must
be followed when servicing the compressor.
A
CAUTION
notification signifies an essential
operation or maintenance procedure, practice,
or condition which, if not strictly observed,
could result in damage to or destruction of
equipment
or potential problems in the outcome
of the procedure being performed. A Caution
notification is displayed in the format shown in
Figure 2.
A
NOTE
provides additional information such as a
tip, comment, or other useful, but not imperative
information. A
NOTE
is displayed in the format
shown in Figure 3 (Note Example).
1.3 Commitment to
Quality
1.4 Safety Summary
1.4.1 Danger Notification
1.5 Precautions
1.4.2 Caution Notification
1.4.3 Note
Figure 1 - Danger
Notification Example
Figure 2 - Caution
Notification Example
Figure 3 - Note Example
Summary of Contents for Turbocor TT-300
