0-37 Display Text 1
Range:
Function:
0
N/A
*
[0 -
0
N/A]
In this parameter, it is possible to write an
individual text string for display in the LCP or to be
read via serial communication. If it is to be
displayed permanently, select Display Text 1 in
0-20 Display Line 1.1 Small
,
0-21 Display Line 1.2
Small
,
0-22 Display Line 1.3 Small
,
0-23 Display Line 2
Large
or
0-24 Display Line 3 Large
. Use the [
▲
] or
[
▼
] buttons on the LCP to change a character. Use
the [
◀
] and [
▶
] buttons to move the cursor. When
a character is highlighted by the cursor, it can be
changed. Use the [
▲
] or [
▼
] buttons on the LCP to
change a character. A character can be inserted by
placing the cursor between two characters and
pressing [
▲
] or [
▼
].
0-38 Display Text 2
Range:
Function:
0
N/A
*
[0 -
0
N/A]
In this parameter, it is possible to write an
individual text string for display in the LCP or to
be read via serial communication. If to be
displayed permanently select Display Text 2 in
0-20 Display Line 1.1 Small
,
0-21 Display Line 1.2
Small
,
0-22 Display Line 1.3 Small
,
0-23 Display Line
2 Large
or
0-24 Display Line 3 Large
. Use the [
▲
] or
[
▼
] buttons on the LCP to change a character. Use
the [
◀
] and [
▶
] buttons to move the cursor. When
a character is highlighted by the cursor, this
character can be changed. A character can be
inserted by placing the cursor between two
characters and pressing [
▲
] or [
▼
].
0-39 Display Text 3
Range:
Function:
0
N/A
*
[0 -
0
N/A]
In this parameter, it is possible to write an
individual text string for display in the LCP or to be
read via serial communication. If it is to be
displayed permanently, select Display Text 3 in
0-20 Display Line 1.1 Small
,
0-21 Display Line 1.2
Small
,
0-22 Display Line 1.3 Small
,
0-23 Display Line 2
Large
or
0-24 Display Line 3 Large
. Use the [
▲
] or
[
▼
] buttons on the LCP to change a character. Use
the [
◀
] and [
▶
] buttons to move the cursor. When
a character is highlighted by the cursor, this
character can be changed. A character can be
inserted by placing the cursor between two
characters and pressing [
▲
] or [
▼
].
0-70 Date and Time
Range:
Function:
Size related
*
[0–0 ]
0-71 Date Format
Option:
Function:
[0]
*
YYYY-MM-DD Sets the date format to be used in the LCP.
[1]
DD-MM-YYYY Sets the date format to be used in the LCP.
[2]
MM/DD/YYYY Sets the date format to be used in the LCP.
0-72 Time Format
Option:
Function:
Sets the time format to be used in the LCP.
[0]
*
24 h
[1]
12 h
0-74 DST/Summertime
Option:
Function:
Choose how Daylight Saving Time/Summertime
should be handled. For manual DST/Summertime
enter the start date and end date in
and
[0]
*
OFF
[2]
Manual
0-76 DST/Summertime Start
Range:
Function:
0 N/A
*
[0 - 0 N/A] Sets the date and time when
summertime/DST starts. The date is
programmed in the format selected in
0-71 Date Format
.
0-77 DST/Summertime End
Range:
Function:
0 N/A
*
[0 - 0 N/A]
6.2.2 General Settings
Define whether the adjustable frequency drive operates in
open-loop or closed-loop.
How to program the adjustab...
VLT AQUA 12-Pulse High Power Instruction Manual
MG.20.Y1.22 - VLT
®
is a registered Danfoss trademark
6-11
6
6
