VLT
®
FCM Series
FREQUENCY
001 LANGUAGE
ENGLISH
50.0 Hz
The 3rd line of the display shows the parameter
number and name, while the status/value of the
selected parameter is shown in line 4.
■
Changing data
Regardless of whether a parameter has been selected
under the Quick menu or the Menu mode, the procedure
for changing data is the same. Pressing the [CHANGE
DATA] key gives access to changing the selected
parameter, following which the underlining in line 4
will flash on the display. The procedure for changing
data depends on whether the selected parameter
represents a numerical data value or a text value.
■
Changing a text value
If the selected parameter is a text value, the text value
is changed by means of the [+/-] keys.
50.0 Hz
FREQUENCY
001 LANGUAGE
ENGLISH
The bottom display line shows the text value that will be
entered (saved) when acknowledgement is given [OK].
■
Infinitely variable change of numeric data value
If the chosen parameter represents a numeric data
value, a digit is first selected by means of the [<>] keys.
50.0 Hz
SETUP
1
FREQUENCY
130 START FREQUENCY
0
9
.0 HZ
Then the chosen digit is changed infinitely variably
by means of the [+/-] keys:
50.0 Hz
SETUP
1
FREQUENCY
130 START FREQUENCY
1
0.0 HZ
The chosen digit is indicated by the digit flashing. The
bottom display line shows the data value that will be
entered (saved) when signing off with [OK].
MG.03.H3.02 - VLT is a registered Danfoss trademark
28
