GLCP keys
Menu keys
The menu keys are divided into functions. The keys below the display and
indicator lamps are used for parameter set-up, including choice of display
indication during normal operation.
130BP045.10
[
Status
]
indicates the status of the adjustable frequency drive and/or the motor. Three different readouts can be chosen by pressing the [Status] key:
5 line readouts, 4 line readouts or Smart Logic Control.
Use
[Status]
for selecting the mode of display or for changing back to display mode from either the quick menu mode, main menu mode or alarm mode.
Also use the [Status] key to toggle single or double readout mode.
[
Quick Menu
]
allows quick set-up of the adjustable frequency drive.
The most common VLT HVAC Drive functions can be programmed here.
The [Quick Menu] consists of:
-
My Personal Menu
-
Quick Set-up
-
Function Set-up
-
Changes Made
-
Loggings
The Function Set-up provides quick and easy access to all parameters required for the majority of VLT HVAC Drive applications including most VAV and
CAV supply and return fans, cooling tower fans, primary, secondary and condenser water pumps and other pump, fan and compressor applications.
Among other features, it also includes parameters for selecting which variables to display on the LCP, digital preset speeds, scaling of analog references,
closed-loop single zone and multi-zone applications and specific functions related to fans, pumps and compressors.
The Quick Menu parameters can be accessed immediately unless a password has been created via par. 0-60
Main Menu Password
, par. 0-61
Access to
Main Menu w/o Password
, par. 0-65
Personal Menu Password
or par. 0-66
Access to Personal Menu w/o Password
.
It is possible to switch directly between Quick Menu mode and Main Menu mode.
[Main Menu]
is used for programming all parameters. The main menu parameters can be accessed immediately unless a password has been created via
par. 0-60
Main Menu Password
, par. 0-61
Access to Main Menu w/o Password
,par. 0-65
Personal Menu Password
or par. 0-66
Access to Personal Menu
w/o Password
. For the majority of VLT HVAC Drive applications, it is not necessary to access the Main Menu parameters but instead the Quick Menu,
Quick Set-up and Function Set-up provide the simplest and quickest access to parameters that are typically required.
It is possible to switch directly between Main Menu mode and Quick Menu mode.
A parameter shortcut can be carried out by pressing the
[Main Menu]
key for 3 seconds. The parameter shortcut allows direct access to any parameter.
[Alarm Log]
displays an Alarm list of the five latest alarms (numbered A1-A5). To obtain additional details about an alarm, use the arrow keys to navigate to the alarm
number and press [OK]. Information is displayed about the condition of the adjustable frequency drive before it enters alarm mode.
The alarm log button on the LCP allows access to both alarm log and maintenance log.
6 How to Operate the Adjustable Frequency
Drive
VLT
®
HVAC Drive Instruction Manual
6-4
MG.11.AB.22 - VLT
®
is a registered Danfoss trademark
6
