1.
2.
3.
4.
5.
e3
0b
h5
32
.1
0
Illustration 100: Local Area Connection 2 Properties
6.17.4.4.4 Setting the Correct Ethernet POWERLINK® Master IP Address
Procedure
Open the
Network and Sharing Center
.
On the left, click on
Change adapter settings
.
Right-click on the network interface used for fieldbus communication and select
Properties
.
Click on
Internet Protocol Version 4 (TCP/IPv4)
(the checkbox must be checked) and then click on
Properties
.
Select
Use the following IP address
and use 192.168.100.240 as the IP address and 255.255.255.0 as the subnet mask. Leave
all other fields empty.
e3
0b
h5
31
.1
0
Illustration 101: Internet Protocol Version 4 (TCP/IPv4) Properties
6.17.4.4.5 Network Settings for Direct Communication with EtherCAT®
Disable all network protocols except TCP/IPv4 on the network interface used for direct EtherCAT® communication. This prevents
other PC software or the operating system using this network interface for other tasks, such as file and printer sharing and network
AQ262449648484en-000101 / 175R1135 | 137
Danfoss A/S © 2020.08
Commissioning
VLT® Servo Drive System ISD 510/DSD 510
Operating Guide
