Item
Description
Cross section
2.5 mm
2
/4.0 mm
2
11.13 Storage
Store the servo system components in a dry, dust-free location with low vibration (v
eff
≦
0.2 mm/s).
The storage location must be free from corrosive gases.
Avoid sudden temperature changes.
Long-term Storage
To recondition the electrolytic capacitors, servo drives and system components not in service must be connected to a supply source
once per year to allow the capacitors to charge and discharge. Otherwise the capacitors could suffer permanent damage.
AQ262449648484en-000101 / 175R1135 | 217
Danfoss A/S © 2020.08
Specifications
VLT® Servo Drive System ISD 510/DSD 510
Operating Guide