Parameter
Initialization setting
Parameter 4-14 Motor Speed Low Limit [Hz]
132.0 Hz
Parameter 4-16 Torque Limit Motor Mode
355.6
Parameter 4-17 Torque Limit Generator Mode
355.6
Parameter 4-30 Motor Feedback Loss Function
[0] Disabled
Parameter 4-32 Motor Feedback Loss Timeout
1.00 s
Parameter 4-53 Warning Speed High
3960
Parameter 4-56 Warning Feedback Low
-4000000
Parameter 4-57 Warning Feedback High
4000000
Parameter 5-02 Terminal 29 Mode
[1] Output
Parameter 5-10 Terminal 18 Digital Input
[8] Start
Parameter 5-11 Terminal 19 Digital Input
[10] Reversing
Parameter 5-12 Terminal 27 Digital Input
[3] Coast and reset inv
Parameter 5-14 Terminal 32 Digital Input
[14] Jog
Parameter 5-40.0 Function Relay
[22] Ready, No Thermal Warning
Parameter 5-40.1 Function Relay
[32] Mech Brake Ctrl
Parameter 5-41 On Delay, Relay
[23] Remote, Ready, No TW
Parameter 5-51 Term. 29 High Frequency
5000 Hz
Parameter 5-53 Term. 29 High Ref./Feedb. Value
50.000
Parameter 5-56 Term. 33 High Frequency
25000 Hz
Parameter 5-58 Term. 33 High Ref./Feedb. Value
50.000
Parameter 6-10 Terminal 53 Low Voltage
0.00 V
Parameter 6-15 Term. 53 High Ref./Feedb. Value
50.000
Parameter 6-20 Terminal 54 Low Voltage
0.00 V
Parameter 6-22 Terminal 54 Low Current
0.00 V
Parameter 6-25 Terminal 54 High Ref./Feedb. Value
50.000
Parameter 6-50 Terminal 42 Output
[103] Motor current
Parameter 7-04 Speed PID Differention Time
0.0
Parameter 7-08 Speed PID Feed Forward Factor
100
Parameter 7-09 Speed PID Error Correction w/Ramp
100000 (max)
Parameter 7-33 Process PID Proportional Gain
0.01
Parameter 8-54 Reversing Select
[0] Digital input
Parameter 8-90 Bus Jog 1 Speed
300 RPM
Parameter 8-91 Bus Jog 2 Speed
300 RPM
Parameter 14-03 Overmodulation
[0] Off
Parameter 14-11 Mains Voltage at Mains Fault
327
Configuring the System
Operating Guide | VLT® FCD 300 PROFIBUS Converter MCA 117
AQ289550754901en-000101 / 130R0890| 23
Danfoss A/S © 2019.11
Summary of Contents for VLT MCA 117
Page 2: ......
