Page 30 of 32
Rev 0.95
4.4.3.
Testing remote communication
An easy way to test the remote communication is via a TCP client where the commands from
Table 1 can be entered. A client found to work well, is the Hercules tool from HW Group, please
see Figure 11.
In Hercules, the carriage return and line feed characters
“
$0D$0A
” must be used as stop
character, please see Figure 11.
Figure 11: The Hercules utility from HW Group.
Further information on Hercules and a download link can be found here:
group.com/products/hercules/index_en.html
5.
Maintenance
Warning before servicing/working on the power supply
•
Turn off the power supply on the local control panel.
•
Press the Emergency Stop switch located at the front door.
Power supply is now safe for maintenance.
